In Nigeria, IMR IS THE SOLE REPRESENTATIVE OF 

Partenair

COMPRESSED AIR - NITROGEN - CHILLED WATER - MEASUREMENT

ARTNER has been supporting its customers for 40 years in the treatment of compressed air and industrial fluids. This expertise is put to good use through a wide range of products for compressed air (compressed air filter, compressed air dryer, compressed air refrigerant, condensate treatment) and adaptable elements, filters of all brands. With regard to industrial fluids, the PARTNER team supports you in the production of chilled water, v...

Breathable compressed air

Air is the source of life!
Air is, above all, the gas that people breathe. In many industries, the air is polluted by dust, chemical agents, toxic gases. Directly using the air from the network to supply people is a mistake not to be made because it contains oil, dust, odors, carbon dioxide (CO2) in high concentrations, carbon monoxide (CO) and other possibly toxic gases. Appropriate treatment allows compressed air to be used as a respiratory source. The cost of this treatment is very reasonable...

The compressed air filter

Compressed air filter is a must!
Pollutants can be classified into 3 main categories:

Liquid pollutants.
Mainly represented by water and oil condensed in the pipes. Liquid water should be removed by a centrifugal separator and not by a filter.
The oil mist will be coalesced by the oil separator filters and eliminated from the network thanks to an automatic drain device.

Solid pollutants.
Pollutants sucked in by the compressor (dust, pollens, etc.) and pollution generated by the compression and...

DUPLEX series two-stage oil separator filters

Solid pollutants.
Pollutants sucked in by the compressor (dust, pollens, etc.) and pollution generated by the compression and distribution system (Metal particles, rust, scale, etc.)

Frozen Water

Produce ice water
A range of chilled water units providing constant cooling water temperature in all seasons. No more city water consumption, no more discharge, no more risk of legionella.

From 1 to 1200 kW cold
Compact, plug-and-play cooling units
Modular groups, equipped according to your specific needs ...

Nitrogen

Nitrogen generators
Production of gaseous nitrogen on site from compressed air. Autonomous nitrogen generators from compressed air at very advantageous costs. Ambient air contains 78% nitrogen, 21% oxygen and 1% rare gases. Nitrogen generators deplete compressed air of oxygen and deliver nitrogen of desired purity at a lower cost.

COALEX series activated carbon columns

Long-term filtration of oil vapors The COALEX series adsorbers are intended for all installations requiring perfectly oil-free air. They have a much longer life than conventional activated carbon filters (of the filter cartridge type) and have a constant efficiency over a minimum period of 10 ...

Sterile filtration for medical air

Efficiency greater than 99.9999% A range of filters equipped with sterilizable filter elements whose integrity is 100% tested before shipment. The filter elements, with stainless steel supports and cups, are guaranteed for 100 sterilization cycles at a temperature of 120 ° C. These filters have been designed for filtration efficiency superior to

Dryers for compressed air circuits

Dryers for compressed air circuits: refrigeration, adsorption, membrane dryer
Water in compressed air is the major pollutant because it is present in abundance in all installations. Compressed air dryers eliminate it. Below you will find our different ranges of dryers.

Filter elements

Guaranteed quality and performance
There are many adaptable filter elements on the market, globalization requires. But not all filter cartridges are created equal.
Our adaptable filter elements for line filters are manufactured in the UK under the ISO 9001 quality standard. They have been validated for their performance by an independent laboratory and fully meet the standards required by the new ISO 8572- standard. 1: 2000

For row filters
A wide range of replacement filter elements for the hou...

PREMIUM filters

Liquid removal WS series separators are designed to remove 100% of liquids from compressed air. They are used to protect air treatment installations (filters, dryers, etc.) from the presence of non-condensables (water / oil) that are harmful to their good efficiency. Equipped with an exclusive deflector, the WS series offers.

ALWITCO BANTAM exhaust silencer

Ideal for use in limited space
The BANTAM ™ silencer is designed with a precise distribution of the peripheral openings in an acoustic element of zinc-plated steel and brass, which gently disperses the exhaust air evenly over 360 °.

Strong and compact , the BANTAM ™ muffler is constructed with corrosion resistant materials to withstand impact and continuous heavy use in all kinds of conditions.

Offered in BSPT and NPT connections, the BANTAM ™ silencer can be attached directly to the exhaust o...

ALWITCO Anti-burst valve muffler

Noise reduction
These valve mufflers feature the outstanding technical characteristics of the standard ATOMUFFLER series from Allied Witan Company (ALWITCO) with, in addition, a relief valve to release any flow greater than the maximum capacity of the muffler.

The design and assembly of high quality at competitive prices , effectively eliminate the unbearable noises emitted by the exhausts of pneumatic installations.

Their safety valve makes it possible to release any excess pressure and thus ...

ALWITCO Two-stage exhaust silencer

Noise reduction, particle filtration.
These ATOMUFFLER mufflers from Allied Witan Company (ALWITCO) feature a two-stage filter element that captures solid particles for longer life and improved noise reduction.

They were developed to treat the exhaust of adsorption air dryers, where the air is loaded with moisture and desiccant dust.

The first filtration stage captures solid particles to improve and optimize the passage of air through the second stage which performs noise reduction .

These m...

ALWITCO Vacuum pump exhaust silencer

Noise reduction at the discharge of vacuum pumps
The ATOMUFFLER Vacuum Pump Exhaust series developed by Allied Witan Company significantly reduces noise without compromising pump performance.

Noise reduction is achieved through an unobstructed expansion chamber which allows the exhaust air velocity to be reduced and gently dispersed to the atmosphere through a large dissemination area without hampering the performance of the exhaust air. pump.

Recommended by ALWITCO for vacuum circuits where s...

ALWITCO Single chamber silencer

Reduce noise without compromising performance
Proven in many industrial fields for decades, ATOMUFFLER mufflers from Allied Witan Company (ALWITCO) provide 85% noise reduction while maintaining 94% flow factor.

These silencers are designed to intercept the noise of the air expelled by the pneumatic exhausts.

They slowly disperse the exhaust to the ambient air through filtering media and a reinforcing cylinder with thousands of perforations. The outgoing flow has its noise level greatly reduced...

ALWITCO Silencer for high pressure circuits

Suppresses noise from high pressure exhausts
Allied Witan Company (ALWITCO) develops tailor-made ATOMUFFLERs which considerably reduce the noise generated when exhausting air at high pressure .

Their design expands the standard fields of application of the valve silencer and helps to control the noise emitted by the exhaust of compressed air under high pressure.

For special situations, the features can be combined with other silencers, including air dryer and pass-through silencers.

These sil...

PARTENAIR Condensate drain - COMBO 230

These solenoid valves are controlled by a timer module making it possible to adjust their operation to the volume of condensate to be eliminated.

All timer modules have a manual function test as standard


Combo 230

"All-in-One" solenoid valve which incorporates a protective strainer and a shut-off valve.


Reliable and economical steam traps.
Simple settings easily adjustable according to the volumes to be evacuated.
Adjustable interval between 2 purges.
Adjustable purge time (except VPF 37)....

combo-230 (2)

combo-230 (3)

combo-230

condensate-drain-captair (1)

condensate-drain-captair (2)

condensate-drain-captair-compact (1)

condensate-drain-captair-compact

condensate-drain-captair

purgeur-condensat-jc-35 (1)

purgeur-condensat-jc-35 (2)

purgeur-condensat-jc-35

purgeur-condensat-tec-11 (1)

purgeur-condensat-tec-11 (2)

purgeur-condensat-tec-11

purgeur-de-condensats-avec-temporisateur-Çlectronique-fluidrain

purgeur-technologie-capacitive-950-t (1)

purgeur-technologie-capacitive-950-t (2)

purgeur-technologie-capacitive-950-t

purgeur-vanne-motorisÇe-tec-44 (1)

purgeur-vanne-motorisÇe-tec-44 (2)

purgeur-vanne-motorisÇe-tec-44

purgeur-vpf-37 (1)

purgeur-vpf-37 (2)

purgeur-vpf-37

purgeurs-sans-alimentation-s-air (1)

purgeurs-sans-alimentation-s-air (2)

purgeurs-sans-alimentation-s-air

steam-traps-without-feed-x-air (1)

steam-traps-without-feed-x-air (2)

steam-traps-without-feed-x-air

pnx-charbon-actif-grade-a (1)

pnx-charbon-actif-grade-a

pnx-particules-grade-d (1)

pnx-particules-grade-d (2)

pnx-particules-grade-d

pnx-prefiltres-microniques-grade-m (1)

pnx-prefiltres-microniques-grade-m

pnx-prefiltres-submicroniques-grade-s (1)

pnx-prefiltres-submicroniques-grade-s (2)

pnx-prefiltres-submicroniques-grade-s

pnx-separateur-grade-ws (1)

pnx-separateur-grade-ws (2)

pnx-separateur-grade-ws

pnx-water-separator-grade-ws

afficheurs-enregistreurs

analyseurs-de-vapeur-d-huile

compteurs-de-particules

dÇbimätres-pour-liquides

dÇbitmÇtrie

debitmetre-massique-flopro

debitmetres-a-insertion-serie-flomat-600

hygromätres-sÇrie-dewmon

hygromÇtrie

hygrometre-dewmat

hygrometre-portable-dewport

mesure-de-puissances

mesures-divers

pito-debimetre-a-insertion-a-tube-pitot

sonde-hygrometrique (1)

sonde-hygrometrique

mesure_analyseur_sentinell-973x1024

epurateur-puro-elite (1)

epurateur-puro-elite (2)

epurateur-puro-elite (3)

epurateur-puro-elite

epurateur-puro-mini (1)

epurateur-puro-mini (2)

epurateur-puro-mini

epurateur-puro-nano (1)

epurateur-puro-nano

repartiteur-distributor (1)

repartiteur-distributor

par-air-pulse-serie-afr (1)

par-air-pulse-serie-afr (2)

par-air-pulse-serie-afr

refrigerant-serie-a (1)

refrigerant-serie-a

locator

Tracair

Vatac Valve Corp Colorado

Vatac is an international leading manufacturer and supplier of industrial valves in the world. Our primary goal is to provide a unique solution for the services of Oil, Gas, Nuclear, Refinery, Chemical, Marine, Potable Water, Waste Water, Sewage, Power Station and Pipeline Industries.

Flange Full Lift Safety Valve

Flange Full Lift Safety Valves can be used on systems where the discharge is relatively simple. The pressure in the discharge system can be atmospheric, at a constant level or where the pressure may build up to a maximum of 10% of the set pressure.

Flange High Performance Butterfly Valve

The Vatac Flange High Performance Butterfly Valves provide accurate control of high capacity, moderate pressure drop services. The double offset design provides an approximate equal percentate flow characteristic and facilitates tight class VI shut-off

Globe Control Valve

Vatac Globe Control Valves covering pressure control and flow control valves, and are designed and manufactured to ensure leakage of less than 100 ppm (parts per million) of volatile organic compounds. Extensive base line laboratory testing (static and cycle testing) has been performed establishing critical design parameters necessary to achieve low emission sealing in the Vatac stem packing seal area and in the bonnet gasket sealing area, In-house testing procedure has been developed and is per...

Power Station Gate Valve

Vatac Pressure Seal Power Station Gate valves are intended for high pressure, high temperature applications in all types of fluid except where severe coking is a factor. The design and material selections provide excellent service in steam-generation stations, industrial chemical plants and thermal power plants. Vatac Pressure Sealed Power Station Gate Valves are offered in both Cast and Forged Steel body. These options make the Vatac Pressure Seal Power Station product line an excellent choice ...

Stainless Steel Check Valve

Vatac Stainless Steel Check Valves are designed and manufactured strictly to International Standards API 6D, BS1868, ASME B16.34 or Equivalent, o reduce the flow resistance and pressure drop to the minimum possible extend, which is suitable to be mounted in horizontal position only, lapped and screwed in seat ring ensures tight shut of and long duration service. Valve’s disc is perfectly designed, accurately machined and guided for efficient automatic shut off at zero pressure, with a feature of...

Three Piece Ball Valve

Vatac Three piece Bolted Body Ball Valves are available both in Forged and Investment Castings. In Straight through two ports or Multi-ports structures. Designed and manufactured to the most updated international standards API 6D, ASME B16.34, BS 5351 or equivalents. With standard features of Fire Safe, Anti-static and Blow-out.

Main Features and Advantages

» Size Ranges: 1/2” through 4”

» Pressure Ratings: 1000WOG, 2000WOG, 3000WOG or ANSI #150 to 2500

» Standards compliance: API 6D, BS 53...

Forged Stainless Steel Gate Valve

Vatac Stainless Steel Gate Valve are designed and manufactured strictly to International Standards API 602, ASME B16.34, DIN3202 or Equivalent, a compact but extremely sturdy design for high pressure-temperature service, Solid CoCr alloy wedge (optional) ensures low friction and long service life, packing rings are precompressed to 4000 psi to provide a high integrity seal, for welded bonnet valves, the bonnet is threaded in and torqued to an engineered torque value and the body bonnet joint is ...

One Piece Ball Valve

Vatac One Piece Uni-body Ball Valves are with compact structure, tight shut-off sealing. Designed and manufactured to the most updated international standards API 6D, ASME B16.34, BS 5351 or equivalents. With standard features of Fire Safe, Anti-static and Blow-out

Vatac One Piece Ball Valves are with main Features as below:
» Size Ranges: 1/4” through 2”
» Pressure Ratings: 1000WOG, 2000WOG, 3000WOG or ANSI #150 to 2500
» Standards compliance: API 6D, BS 5351, ASME B16.34, DIN 3202 or equiva...

YANGZHOU CHENGDE STEEL PIPE CO.,LTD

CHENGDE Group was founded in 1988, and has been growing to a leading large-diameter Seamless pipe manufacturer with production range 8``-48`` in OD and wall thickness from 9.53 mm up to 140mm. CHENGDE is a joint venture with American PCC Group (Precision Castparts Corp. Fortune 500 enterprises of USA, PCC is the world leader in structural investment castings, forged components, and airfoil castings for aircraft engines and industrial gas turbines. Airbus, Boeing, GE, Rolls-Royce, and many other ...

All Pipes

Product categories of Carbon Steel Pipe, we are specialized manufacturers from China, Carbon Steel Pipe, Seamless Carbon Steel Pipe suppliers/factory, wholesale high-quality products of Nuclear Steel Pipe R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!

ASTM A106 Carbon Steel Pipe
ASME SA106 Carbon Steel Pipe
ASTM A53 Carbon Steel Pipe
ASME SA53 Carbon Steel Pipe
EN 10210 Carbon Steel Pipe
EN 10297 Carbon Steel Pipe
EN 102...